>20-Watts Average Power Ultrashort-Pulse Fiber Laser
IMPULSE™ is an all-diode-pumped, direct-diode-pumped Yb-doped fiber oscillator/amplifier system capable of producing variable pulse energies up to 10 microjoules at repetition rates between 200 kHz1; and 25 MHz (20 Watts average power output at 2 MHz.) This is more than an order-of-magnitude higher than has traditionally been available in a one-box ultrashort pulse laser design.
IMPULSE™ is based on a revolutionary new concept in mode-locked oscillator/amplifier technology. The use of a Yb-doped fiber-oscillator/fiber-amplifier design combines the low noise performance associated with solid state operation with the high spatial mode quality of fiber lasers.
IMPULSE™ is a compact, robust source of femtosecond pulses with the ease-of-operation, stability and reliability you would expect from a fiber source. And all its major parameters are computer controlled, which allow it to be easily interfaced to your industrial workstation or experiment. Optional accessories include micromachining workstations, harmonic generators, and OPA/NOPA wavelength converters.
1 Preliminary specifications. Subject to change without notice. Contact Clark-MXR, at sales@cmxr.com for further details.
2 Optional pulse picker available to adjust repetition rate in the range of 200 kHz to single shot.
IMPULSE™ is an all-diode-pumped, direct-diode-pumped Yb-doped fiber oscillator/amplifier system capable of producing variable pulse energies up to 10 microjoules at repetition rates between 200 kHz1; and 25 MHz (20 Watts average power output at 2 MHz.) This is more than an order-of-magnitude higher than has traditionally been available in a one-box ultrashort pulse laser design.
IMPULSE™ is based on a revolutionary new concept in mode-locked oscillator/amplifier technology. The use of a Yb-doped fiber-oscillator/fiber-amplifier design combines the low noise performance associated with solid state operation with the high spatial mode quality of fiber lasers.
IMPULSE™ is a compact, robust source of femtosecond pulses with the ease-of-operation, stability and reliability you would expect from a fiber source. And all its major parameters are computer controlled, which allow it to be easily interfaced to your industrial workstation or experiment. Optional accessories include micromachining workstations, harmonic generators, and OPA/NOPA wavelength converters.
| Impulse Specificaitons | |
| Repetition Rate | User adjustable via computer from 200 kHz to 25 MHz |
| Pulse Energy | User adjustable via computer between 100 nJ and 10 µJ |
| Average Power Output | User adjustable via computer up to 20 Watts @ >2 MHz repetition rate |
| Pulse Width | User adjustable via computer from <250 fs to 10 ps |
| Transverse Mode | TEM00,M2 < 1.2 - 1.5 depending on pulse energy |
| Noise | <1% RMS |
| Central Wavelength | 1.03 µm |
| Electrical | 95-260 VAC, 20 Amps |
1 Preliminary specifications. Subject to change without notice. Contact Clark-MXR, at sales@cmxr.com for further details.
2 Optional pulse picker available to adjust repetition rate in the range of 200 kHz to single shot.
